When it comes to hydrogen water performance, peak ppm numbers only tell part of the story. What truly matters is how much dissolved hydrogen remains available over time — both sealed and after opening.

The HUVE Perform Hydrogen Water Bottle (Model: HV-H2P-01) has undergone comprehensive third-party laboratory testing by H2 Analytics, including:

Two-hour sealed hydrogen retention testing
Two-hour open-bottle dissipation testing

The results confirm that HUVE Perform delivers not only industry-leading peak concentration, but clinically meaningful hydrogen dosage even hours later.

All performance data below is taken directly from the official H2 Analytics laboratory report. The redacted data is from a competitors product which performed well below the HUVE Perform.

Two-Hour Sealed Hydrogen Retention Test

This test measures how well dissolved hydrogen is retained when the bottle remains unopened for two hours after completing a 10-minute cycle.

Test #1 Results – Sealed for 2 Hours

Bottle	Starting (mg/L)	Starting (ppb)	Ending After 2 hrs (mg/L)	Ending (ppb)	2-Hr Change
HUVE Perform	5.56	5560	5.11	5110	-450 ppb

What This Demonstrates

HUVE Perform begins at 5,560 ppb
After two hours sealed, it retains 5,110 ppb
Hydrogen loss over two hours is minimal
The dosage after two hours is 1.175mg (2.3x higher than the 0.5mg minimum therapeutic level)

This confirms the efficiency of HUVE’s PEM electrolysis system and pressure-controlled chamber in preserving dissolved hydrogen.

Two-Hour Open Bottle Dissipation Test

This test evaluates real-world use conditions. After completing the 10-minute cycle, the bottle was opened and tested immediately, then every 30 minutes over a two-hour period.

Test #2 Results – HUVE Perform Open Bottle Dissipation

Time (min)	Dissolved H₂ (mg/L)	Dissolved H₂ (ppb)	H₂ Dose (mg, 230mL)
0	5.88	5876	1.35 mg
30	4.05	4050	0.93 mg
60	3.17	3174	0.73 mg
90	2.61	2611	0.60 mg
120	2.32	2315	0.53 mg

How would a typical 400ml Glass bottle

Let's take the Hydroh 400ml, with it's H2 Analytics certified 1530ppb (See Hydroh H2 Analytics lab report here) which equates to a dosage (in 400ml) of 0.61mg, slightly above the minimum 0.5mg threshold set by the ITSA.

If we assume the same dissipation rate as the HUVE Perform, after just 30mins the Hydroh is down to just 0.52mg which is right on the minimum threshold for therapeutic benefits.

Any longer and it's highly unlikely any therapeutic benefit will be realised.

This is a great example of why a smaller capacity 230ml hydrogen water bottle is a superior choice, as drinking 230ml within 15-20mins where the hydrogen dosage is at it's peak is reasonable for the average person.

Check out our blog HUVE Perform vs Hydroh Hydrogen Water Bottle for more details.

The HUVE Perform is still above the ISHA Therapeutic Threshold After 2 Hours!

The International Society for Hydrogen Administration (ISHA) identifies 0.5 mg of dissolved hydrogen as a therapeutic dose.

HUVE Perform starts at:

5,876 ppb
Delivering 1.35 mg of molecular hydrogen in a full 230mL serving

Crucially:

Even after 120 minutes open, HUVE Perform still delivers:

2.32 mg/L (2315 ppb)
Equivalent to 0.53 mg of dissolved hydrogen

That remains above the 0.5 mg therapeutic threshold.

This means that even if consumed two hours after production, HUVE Perform still provides a clinically meaningful hydrogen dose.

Realistically the HUVE Perform 230ml serve can easily be consumed within 15-20 mins ensuring a highly effective dose of ~1mg.

Certified. Verified. Transparent.

HUVE Perform has undergone extensive independent validation:

✅ H2 Analytics Certified

Independent laboratory verification of dissolved hydrogen production
https://www.huve.com.au/blogs/product-comparisons/huve-perform-hydrogen-water-bottle-earns-certification-from-h2-analytics

✅ H2HUBB Certified

Third-party evaluation by one of the most respected hydrogen testing authorities
https://www.huve.com.au/blogs/product-comparisons/huve-perform-achieves-prestigious-h-hubb-certification

With this additional hydrogen dissipation testing, HUVE Perform demonstrates a level of:

Transparency
Scientific rigour
Real-world performance validation
Multi-layered third-party verification

That level of detail is unheard of in the hydrogen water category where so many products exist with unsubstantiated claims and without 3rd party testing.

Why Dissipation Testing Matters

Many hydrogen water bottles advertise high ppm levels immediately after electrolysis. However, few publish:

H2 Analytics or H2HUBB testing reports
Sealed retention data
Open-bottle dissipation curves
Dosage calculations
Therapeutic threshold comparisons

HUVE provides all of the above.

The Bottom Line

While both the HUVE Perform and bottles like the Hydroh are both H2 Analytics ISHA certified, the devil is in the detail. The HUVE Perform will provide a highly therapeutic dosage even after >1hr, the Hydroh in the best case scenario only provides slightly above the minimum dosage required for certification, meaning it's unlikely to provide significant therapeutic benefits without literally chugging the entire 400ml shortly after the electrolysis cycle is completed (twice!).

Hydrogen water performance is not just about how high it peaks (the PPM or PPB value), it’s about how much usable hydrogen remains when you actually consume the entire bottle (a.k.a The "Dosage").

With:

Industry-leading starting concentration (5,876 ppb)
1.35mg dosage in 230ml
Minimal two-hour sealed loss
Therapeutic-level retention even after two hours open
Independent certification from both H2 Analytics and H2HUBB

HUVE Perform continues to raise the bar for hydrogen bottle testing transparency and performance validation.

When it comes to verified hydrogen delivery,
The HUVE Perform stands in a league of its own.

Don't forget to checkout our blog on discussing hydrogen bottle materials: Tritan™ vs PC Plastic vs Glass

HUVE Perform - 2026 Hydrogen Dissipation Testing by H2 Analytics